Wireless WiFi Smart Switch Receiver Module 433Mhz 110V 220V Smart Home Remote Control Wall Light Switches Work With Amazon Alexa

$10.04$34.82

800 in stock

38 Sold

Clear
Compare
SKU: 32950995424 Category:

Wireless WiFi Smart Switch Receiver Module 433Mhz 110V 220V Smart Home Remote Control Wall Light Switches Work With Amazon Alexa

Note:

This 86 remote control only support the learning code (1527) of the receiver Compatible with remote control using these chips: PT1527,EV1527, SCT527, HS1527, SCL1527, FP1527,EV1527 Do not use this remote control to clone other remote controls,you will lose the built-in 1527 encoding. It is a panel 86 wall transmitter that can be stuck onto anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver, it can work with any kind learning code receiver in our store. So that the trouble brought by routing is avoided successfully.
Working Voltage: DC12V 27A Battery (Not included)
Working Frequency: 433mhz
IC Chip: EV1527
Distance: 10-180m (Open Space Long Distance)
Working Current : 20-25ma
Big Button wall Transmitter is your best choice for home or Public Places remote control system. Technical Data Of Wifi + RF 1CH Smart Switch Receiver: Input Voltage : AC 90-250V Max Current : 10A Wireless Type : Wifi 2.4GHz Wireless standard : IEEE 802 .11 b/g/n Remote ON/OFF: Turn electrical devices on/off from anywhere App Support: Free iOS and Android mobile App ‘Smart Life’ Sync Status: Real-time device status provided to App Timing: Set scheduled/countdown/loop timers to turn on/off at specified time Share Control: Control your smart home together with your family Scene: Turn on/off a gang of devices with one tap Voice Control: Works perfectly with Amazon Alexa,Google Home,IFTTT Note: 1.It Supports Android 4.3 and Newer. 2.It Supports ios 8.0 and Newer. Notice: Different options include different packages:

Package 1 Included: 1 Pcs x 2 Button RF 433Mhz 86 Wall Panel Remote Transmitter (Battery not included) ;

Package 2 Included: (Only 1 receiver) 1CH RF+WIFI Smart Switch Receiver module *1pcs ( include package );

Package 3 Included: 1 Pcs * RF+Wifi Smart Switch Receiver Module ( include Package ),

1 Pcs * 2 Button RF 433Mhz 86 Wall Panel Remote Transmitter (Battery not included). Package 4 Included: 2 Pcs* RF+Wifi Smart Switch Receiver Module ( include Package ) ,
1 Pcs * 2 Button RF 433Mhz 86 Wall Panel Remote Transmitter (Battery not included). Free Gift: Cross screwdriver * 1pcs. Attention Please: Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.

How to install this smart switch: You don’t need to open the outer casing of this smart switch You can wire directly to the terminal block Please note: Please turn off the power before wiring. Please connect the wires according to the following diagram. After the wiring is completed, turn on the power and operate according to the status of the smart switch indicator: 1) If the blue light of the smart switch flashes continuously at this time, it indicates that the smart switch has entered the state of waiting for connection to WiFi; then open the APP and follow the instructions to connect to WiFi. 2) If the indicator light of the smart switch is not flashing blue light, please press the button of the smart switch and keep it for more than 5 seconds until the blue light flashes continuously, then open the APP and connect to the WiFi according to the manual. Scan the QR-code of the manual or Search ‘ Smart Life ’ to download and install the device’s APP How to match smart switch with 433Mhz RF remote control? This smart switch has 3 working modes to match the 433Mhz RF remote: (smart switch, hereinafter referred to as: receiver) About receiver’s Working Mode: Momentary mode: Press the Remote control button, the receiver’s relay is ON; release button, the receiver’s relay is OFF. Toggle mode: Press Remote control button for 1 time, the receiver’s relay is ON; press button again, the receiver’s relay is OFF. Latched mode: Press Remote control button A, the receiver’s relay is ON, Press the transmitter’s button B, the receiver’s relay is OFF. Reset function: After push the receiver’s learning button 8 times, the receiver Clear all the remote control data in its memory. When the red LED flashes for a few times, it indicates that the clear function is completed. (After cleared the code in the receiver, all the remote control cannot work with the receiver.) Matching method: 1. Setting momentary Mode: Press the receiver’s Learning button 1 time, the receiver’s red LED will be lights up, it comes into Setting state; Press the remote’s button, the receiver’s red LED will flash then come off, Setting successfully. 2. Setting Toggle Mode (Common working mode): Press the receiver’s Learning button 2 time, the receiver’s red LED will be lights up, it comes into Setting state; Press the remote’s button, the receiver’s red LED will flash then come off, Setting successfully. 3. Setting Latched Mode: (Note: When you choose “Latched Mode”, you need to setting two different buttons on the Remote control, the first time learn is for “ON”, the second time learn for “OFF”. For example: button A = ON, button B = OFF) Press the receiver’s Learning button 3 time, the receiver’s red LED will be lights up, it comes into Setting state; Press the remote’s A button, the receiver’s red LED will flash and then remains lit; Then press the remote’s B button, the receiver’s red LED will flash then come off, Setting successfully. Note: A Smart Switch can only store 12 buttons (on the remote). Saved button number of more than 12, it will cause all of the stored remote control cannot control the Smart Switch. You need reboot the power and reset the RF remote control settings (press the Smart Switch’s matching button 8 times). Q&A 1. My device has added successfully but stays “Offline”? Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the led status: Led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong Wi-Fi password or your device is too far away from the router, which causes a weak Wi-Fi signal. The device cannot be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open. 2. Why the APP can’t find the device in pairing status? Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again. 3. The led keeps off, even if the device is powered on. Press the button but the device does not work. Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost. Instructions: The first step: Clear the receiver’s memory Press the Learning Button on the receivers for 8 times, the codes will be cleaned. After cleaning the code, all the remote control can not work any more. Step Two : Match Wall Panel Remote Transmitter and Receiver Press the learning key on the receiver twice time, it comes into toggle setting mode. Wait for a moment, the LED will be on , it comes into learning state. Press the remote button, LED indicator on the receiver board will flash then come off Learning successfully. USD 4.85-15.11/pieceUSD 3.39-13.59/pieceUSD 3.29-7.59/pieceUSD 5.03-10.70/setUSD 4.54-11.04/pieceUSD 4.05-25.51/pieceUSD 4.79-23.99/pieceUSD 5.02-17.41/piece

Additional information

Weight 0.16 kg
Dimensions 12 × 12 × 10 cm
Item Type

Switches

Certification

ce,CCC,RoHS

Switch Type

APP Control

Model Number

DIY Timer Universal Smart Home 220V Wireless RF Remote Control Switch

Brand Name

joydeal

Features

interruptor de pared wifi light switch on off wireless remote control

Warranty

1Year Warranty Smart Wifi Led Light Lamp Wall Switch interruptor touch

Current

10A

Material

PLASTIC

Support Apps

Works with Amazon Alexa & Google Nest & Google Home Assistant

Input voltage

AC 90V ~ 250V

Max Current

10A

Max Output Power

2200W

Transmission mode

Wifi and 433Mhz RF Wireless Remote Control

Timer function

Light Timer Switch

Wireless Standard

IEEE 802.11 b/g/n

Support

iOS and Android

Function

2.4Ghz Smart Remote Control

Application

Home, Office, Hotel, Smart Wifi Light Switch

Remote Distance

50 Meters Remote Control Switch In Open Space

Average Rating

5.00

08
( 8 Reviews )
5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Submit your review

Your email address will not be published. Required fields are marked *

8 Reviews For This Product

  1. 08

    by J***s

    Good work very good

  2. 08

    by K***n

    Long sent. But i came quickly. I did not check in the work.

  3. 08

    by E***t

    The product works OK. It was ordered on January 4 and it was not shipped until Jan 24. There was no acknowledgement of the delayed shipment despite two messages I sent to the store requesting information about the shipment.

  4. 08

    by W***S

    Bravo the success of the parcel has arrived, but I have begun !!!!

  5. 08

    by A***v

    The parcel came quickly enough. The modules are working, the wifi is connected without problems, and the radio buttons are also switched. The only thing i want to say is that it is not sonoff modules. I do not recommend buying them for self-flashing. Here is quite an unusual circuitry, so you will get to control the relay by wifi (only from the radio windows. They do not depend on wifi). So if you are going to use only with a standard application, then i can recommend to buy

  6. 08

    by B***s

    There was an initial problem with the ship but the store remedied. The product itself works great and does exactly what I needed it for, wifi and wireless light switches.

  7. 08

    by K***n

    super fast shipping ! works great!

  8. 08

    by J***n

    function great, easy to install. the wire attachment is not very strong though, and easy to ruin…X

Vendor Information

  • Vendor:
  • 4.83 4.83 rating from 1167 reviews

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Categories

Wireless WiFi Smart Switch Receiver Module 433Mhz 110V 220V Smart Home Remote Control Wall Light Switches Work With Amazon Alexa

$10.04$34.82

Add to Cart